/*
* m54xxsim.h -- ColdFire 547x/548x System Integration Unit support.
*/

#ifndef m54xxsim_h
#define m54xxsim_h

#define CPU_NAME "COLDFIRE(m54xx)"
#define CPU_INSTR_PER_JIFFY 2
#define MCF_BUSCLK (MCF_CLK / 2)

#include <asm/m54xxacr.h>

#define MCFINT_VECBASE 64

/*
* Interrupt Controller Registers
*/
#define MCFICM_INTC0 (MCF_MBAR + 0x700) /* Base for Interrupt Ctrl 0 */

#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
#define MCFINTC_IRLR 0x18 /* */
#define MCFINTC_IACKL 0x19 /* */
#define MCFINTC_ICR0 0x40 /* Base ICR register */

/*
* UART module.
*/
#define MCFUART_BASE0 (MCF_MBAR + 0x8600) /* Base address UART0 */
#define MCFUART_BASE1 (MCF_MBAR + 0x8700) /* Base address UART1 */
#define MCFUART_BASE2 (MCF_MBAR + 0x8800) /* Base address UART2 */
#define MCFUART_BASE3 (MCF_MBAR + 0x8900) /* Base address UART3 */

/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_TIMER (MCFINT_VECBASE + 54) /* Slice Timer 0 */
#define MCF_IRQ_PROFILER (MCFINT_VECBASE + 53) /* Slice Timer 1 */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + 35)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + 34)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + 33)
#define MCF_IRQ_UART3 (MCFINT_VECBASE + 32)

/*
* Slice Timer support.
*/
#define MCFSLT_TIMER0 (MCF_MBAR + 0x900) /* Base addr TIMER0 */
#define MCFSLT_TIMER1 (MCF_MBAR + 0x910) /* Base addr TIMER1 */

/*
* Generic GPIO support
*/
#define MCFGPIO_PIN_MAX 0 /* I am too lazy to count */
#define MCFGPIO_IRQ_MAX -1
#define MCFGPIO_IRQ_VECBASE -1

/*
* EDGE Port support.
*/
#define MCFEPORT_EPPAR (MCF_MBAR + 0xf00) /* Pin assignment */
#define MCFEPORT_EPDDR (MCF_MBAR + 0xf04) /* Data direction */
#define MCFEPORT_EPIER (MCF_MBAR + 0xf05) /* Interrupt enable */
#define MCFEPORT_EPDR (MCF_MBAR + 0xf08) /* Port data (w) */
#define MCFEPORT_EPPDR (MCF_MBAR + 0xf09) /* Port data (r) */
#define MCFEPORT_EPFR (MCF_MBAR + 0xf0c) /* Flags */

/*
* Pin Assignment register definitions
*/
#define MCFGPIO_PAR_FBCTL (MCF_MBAR + 0xA40)
#define MCFGPIO_PAR_FBCS (MCF_MBAR + 0xA42)
#define MCFGPIO_PAR_DMA (MCF_MBAR + 0xA43)
#define MCFGPIO_PAR_FECI2CIRQ (MCF_MBAR + 0xA44)
#define MCFGPIO_PAR_PCIBG (MCF_MBAR + 0xA48) /* PCI bus grant */
#define MCFGPIO_PAR_PCIBR (MCF_MBAR + 0xA4A) /* PCI */
#define MCFGPIO_PAR_PSC0 (MCF_MBAR + 0xA4F)
#define MCFGPIO_PAR_PSC1 (MCF_MBAR + 0xA4E)
#define MCFGPIO_PAR_PSC2 (MCF_MBAR + 0xA4D)
#define MCFGPIO_PAR_PSC3 (MCF_MBAR + 0xA4C)
#define MCFGPIO_PAR_DSPI (MCF_MBAR + 0xA50)
#define MCFGPIO_PAR_TIMER (MCF_MBAR + 0xA52)

#define MCF_PAR_SDA (0x0008)
#define MCF_PAR_SCL (0x0004)
#define MCF_PAR_PSC_TXD (0x04)
#define MCF_PAR_PSC_RXD (0x08)
#define MCF_PAR_PSC_CTS_GPIO (0x00)
#define MCF_PAR_PSC_CTS_BCLK (0x80)
#define MCF_PAR_PSC_CTS_CTS (0xC0)
#define MCF_PAR_PSC_RTS_GPIO (0x00)
#define MCF_PAR_PSC_RTS_FSYNC (0x20)
#define MCF_PAR_PSC_RTS_RTS (0x30)
#define MCF_PAR_PSC_CANRX (0x40)

#endif /* m54xxsim_h */