#ifndef __ASM_AVR32_IO_H
#define __ASM_AVR32_IO_H

#include <linux/bug.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/types.h>

#include <asm/addrspace.h>
#include <asm/byteorder.h>

#include <mach/io.h>

/* virt_to_phys will only work when address is in P1 or P2 */
static __inline__ unsigned long virt_to_phys(volatile void *address)
{
return PHYSADDR(address);
}

static __inline__ void * phys_to_virt(unsigned long address)
{
return (void *)P1SEGADDR(address);
}

#define cached_to_phys(addr) ((unsigned long)PHYSADDR(addr))
#define uncached_to_phys(addr) ((unsigned long)PHYSADDR(addr))
#define phys_to_cached(addr) ((void *)P1SEGADDR(addr))
#define phys_to_uncached(addr) ((void *)P2SEGADDR(addr))

/*
* Generic IO read/write. These perform native-endian accesses. Note
* that some architectures will want to re-define __raw_{read,write}w.
*/
extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);

extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);

static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
{
*(volatile u8 __force *)addr = v;
}
static inline void __raw_writew(u16 v, volatile void __iomem *addr)
{
*(volatile u16 __force *)addr = v;
}
static inline void __raw_writel(u32 v, volatile void __iomem *addr)
{
*(volatile u32 __force *)addr = v;
}

static inline u8 __raw_readb(const volatile void __iomem *addr)
{
return *(const volatile u8 __force *)addr;
}
static inline u16 __raw_readw(const volatile void __iomem *addr)
{
return *(const volatile u16 __force *)addr;
}
static inline u32 __raw_readl(const volatile void __iomem *addr)
{
return *(const volatile u32 __force *)addr;
}

/* Convert I/O port address to virtual address */
#ifndef __io
# define __io(p) ((void *)phys_to_uncached(p))
#endif

/*
* Not really sure about the best way to slow down I/O on
* AVR32. Defining it as a no-op until we have an actual test case.
*/
#define SLOW_DOWN_IO do { } while (0)

#define __BUILD_MEMORY_SINGLE(pfx, bwl, type) \
static inline void \
pfx##write##bwl(type val, volatile void __iomem *addr) \
{ \
volatile type *__addr; \
type __val; \
\
__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
__val = pfx##ioswab##bwl(__addr, val); \
\
BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
\
*__addr = __val; \
} \
\
static inline type pfx##read##bwl(const volatile void __iomem *addr) \
{ \
volatile type *__addr; \
type __val; \
\
__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
\
BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
\
__val = *__addr; \
return pfx##ioswab##bwl(__addr, __val); \
}

#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow) \
static inline void pfx##out##bwl##p(type val, unsigned long port) \
{ \
volatile type *__addr; \
type __val; \
\
__addr = __io(__swizzle_addr_##bwl(port)); \
__val = pfx##ioswab##bwl(__addr, val); \
\
BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
\
*__addr = __val; \
slow; \
} \
\
static inline type pfx##in##bwl##p(unsigned long port) \
{ \
volatile type *__addr; \
type __val; \
\
__addr = __io(__swizzle_addr_##bwl(port)); \
\
BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
\
__val = *__addr; \
slow; \
\
return pfx##ioswab##bwl(__addr, __val); \
}

#define __BUILD_MEMORY_PFX(bus, bwl, type) \
__BUILD_MEMORY_SINGLE(bus, bwl, type)

#define BUILDIO_MEM(bwl, type) \
__BUILD_MEMORY_PFX(, bwl, type) \
__BUILD_MEMORY_PFX(__mem_, bwl, type)

#define __BUILD_IOPORT_PFX(bus, bwl, type) \
__BUILD_IOPORT_SINGLE(bus, bwl, type, ,) \
__BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)

#define BUILDIO_IOPORT(bwl, type) \
__BUILD_IOPORT_PFX(, bwl, type) \
__BUILD_IOPORT_PFX(__mem_, bwl, type)

BUILDIO_MEM(b, u8)
BUILDIO_MEM(w, u16)
BUILDIO_MEM(l, u32)

BUILDIO_IOPORT(b, u8)
BUILDIO_IOPORT(w, u16)
BUILDIO_IOPORT(l, u32)

#define readb_relaxed readb
#define readw_relaxed readw
#define readl_relaxed readl

#define readb_be __raw_readb
#define readw_be __raw_readw
#define readl_be __raw_readl

#define writeb_relaxed writeb
#define writew_relaxed writew
#define writel_relaxed writel

#define writeb_be __raw_writeb
#define writew_be __raw_writew
#define writel_be __raw_writel

#define __BUILD_MEMORY_STRING(bwl, type) \
static inline void writes##bwl(volatile void __iomem *addr, \
const void *data, unsigned int count) \
{ \
const type *__data = data; \
\
while (count--) \
__mem_write##bwl(*__data++, addr); \
} \
\
static inline void reads##bwl(const volatile void __iomem *addr, \
void *data, unsigned int count) \
{ \
type *__data = data; \
\
while (count--) \
*__data++ = __mem_read##bwl(addr); \
}

#define __BUILD_IOPORT_STRING(bwl, type) \
static inline void outs##bwl(unsigned long port, const void *data, \
unsigned int count) \
{ \
const type *__data = data; \
\
while (count--) \
__mem_out##bwl(*__data++, port); \
} \
\
static inline void ins##bwl(unsigned long port, void *data, \
unsigned int count) \
{ \
type *__data = data; \
\
while (count--) \
*__data++ = __mem_in##bwl(port); \
}

#define BUILDSTRING(bwl, type) \
__BUILD_MEMORY_STRING(bwl, type) \
__BUILD_IOPORT_STRING(bwl, type)

BUILDSTRING(b, u8)
BUILDSTRING(w, u16)
BUILDSTRING(l, u32)

/*
* io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
*/
#ifndef ioread8

#define ioread8(p) ((unsigned int)readb(p))

#define ioread16(p) ((unsigned int)readw(p))
#define ioread16be(p) ((unsigned int)__raw_readw(p))

#define ioread32(p) ((unsigned int)readl(p))
#define ioread32be(p) ((unsigned int)__raw_readl(p))

#define iowrite8(v,p) writeb(v, p)

#define iowrite16(v,p) writew(v, p)
#define iowrite16be(v,p) __raw_writew(v, p)

#define iowrite32(v,p) writel(v, p)
#define iowrite32be(v,p) __raw_writel(v, p)

#define ioread8_rep(p,d,c) readsb(p,d,c)
#define ioread16_rep(p,d,c) readsw(p,d,c)
#define ioread32_rep(p,d,c) readsl(p,d,c)

#define iowrite8_rep(p,s,c) writesb(p,s,c)
#define iowrite16_rep(p,s,c) writesw(p,s,c)
#define iowrite32_rep(p,s,c) writesl(p,s,c)

#endif

static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
unsigned long count)
{
memcpy(to, (const void __force *)from, count);
}

static inline void memcpy_toio(volatile void __iomem *to, const void * from,
unsigned long count)
{
memcpy((void __force *)to, from, count);
}

static inline void memset_io(volatile void __iomem *addr, unsigned char val,
unsigned long count)
{
memset((void __force *)addr, val, count);
}

#define mmiowb()

#define IO_SPACE_LIMIT 0xffffffff

extern void __iomem *__ioremap(unsigned long offset, size_t size,
unsigned long flags);
extern void __iounmap(void __iomem *addr);

/*
* ioremap - map bus memory into CPU space
* @offset bus address of the memory
* @size size of the resource to map
*
* ioremap performs a platform specific sequence of operations to make
* bus memory CPU accessible via the readb/.../writel functions and
* the other mmio helpers. The returned address is not guaranteed to
* be usable directly as a virtual address.
*/
#define ioremap(offset, size) \
__ioremap((offset), (size), 0)

#define ioremap_nocache(offset, size) \
__ioremap((offset), (size), 0)

#define iounmap(addr) \
__iounmap(addr)

#define cached(addr) P1SEGADDR(addr)
#define uncached(addr) P2SEGADDR(addr)

#define virt_to_bus virt_to_phys
#define bus_to_virt phys_to_virt
#define page_to_bus page_to_phys
#define bus_to_page phys_to_page

/*
* Create a virtual mapping cookie for an IO port range. There exists
* no such thing as port-based I/O on AVR32, so a regular ioremap()
* should do what we need.
*/
#define ioport_map(port, nr) ioremap(port, nr)
#define ioport_unmap(port) iounmap(port)

/*
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
* access
*/
#define xlate_dev_mem_ptr(p) __va(p)

/*
* Convert a virtual cached pointer to an uncached pointer
*/
#define xlate_dev_kmem_ptr(p) p

#endif /* __ASM_AVR32_IO_H */